Netgear’s Firmware Problem

Hubs, switches, routers, wireless adapters and even NAS devices . . . I’ve used a wide range of Netgear products over the years. The Netgear brand has traditionally been reliable, offering products for which I’ve trusted and have been comfortable using at home, in the office and when making product recommendations to others.

Unfortunately, over the past several years, I’ve noticed a growing trend when it comes to the quality of their firmware, more specifically, a lack thereof. Netgear firmware for routers often have bugs resulting in various issues post-firmware upgrade. I’ve written several posts about firmware issues affecting the Netgear R7000 AC1900 Nighthawk Smart Wi-Fi router (see RELATED POSTS below). Netgear released buggy firmware which resulted in network connectivity issues, sporadic and spotty wireless connections, dropped connections, spontaneous router reboots and so forth. After several months with no sign of a permanent fix from Netgear and given this router was deployed in an office environment, the only solution was to replace the router.

After reviewing alternative router options (including routers from other brands), the Netgear R7000 AC1900 Nighthawk Smart Wi-Fi router was replaced with the Netgear AX6000-Nighthawk AX8 8-Stream Wi-Fi 6 router in hopes that a new router with a different version of Netgear’s router firmware would function properly. During the implementation, the factory installed firmware was upgraded to the latest version available at the time, version 1.0.1.40. While this firmware version was “stable” when compared to the recent firmware releases for the R7000, it was not bug-free.

For instance, on the router’s Statistics page, the statistics for the WAN connection resets every 24 hours instead of accumulating stats until the router is rebooted. Since the Internet connection has a static IP assigned, the reset was not due to DHCP lease time. I also confirmed the WAN connection was not dropping every 24 hours (and yes, this was a major concern). This is the router resetting the statistics for the WAN connection for no apparent reason. On the Attached Devices page, after 24 hours, some identifying information of attached devices (ex: brand of device) randomly disappear until the router is rebooted. In addition, devices no longer connected to the router may still show up in the Attached Devices list long after the device is no longer connected to the network.

Netgear did release firmware version 1.0.1.56 for the Netgear AX6000-Nighthawk AX8 8-Stream Wi-Fi 6 router; however, preliminary reviews were less than promising with some experiencing slower performance and connectivity issues post-firmware upgrade. The latest firmware version for the Netgear AX6000-Nighthawk AX8 8-Stream Wi-Fi 6 router is version 1.0.1.58. Given prior experience, I am extremely hesitant to upgrade the firmware at this time. At the very least, I have a “stable” router even though there are some functionality bugs/issues (these bugs/issues do not affect end-users).

Netgear has a quality control problem when it comes to their firmware releases. They need to conduct more thorough beta testing before releasing firmware upgrades to customers for use in live production environments. Some Netgear routers aren’t inexpensive either. Customers should not be paying a premium for sub-par quality firmware which is crucial to operating and managing the devices.

While it’s impossible to test for every scenario, Netgear should take a closer look at its internal processes to ensure their firmware releases have met a higher standard before release. Netgear customers are not signing-up to be beta testers. The risks associated with using problematic firmware are extremely high which can lead to loss productivity, downtime or worse. Netgear needs to step up, improve their quality control and restore the Netgear brand name and its reputation to one that is representative of the highest standards of quality and reliability.

 

LINKS:

Note: The links below include Affiliate Links. Please review the section entitled "Affiliate Links" in the Terms of Use of this website for additional information.

Netgear Routers Mentioned In This Post

Netgear R7000 AC1900 Nighthawk Smart Wi-Fi Router - https://amzn.to/2IjkCR7

Netgear AX6000-Nighthawk AX8 8-Stream Wi-Fi 6 Router - https://amzn.to/2MMIjpg

Stable Netgear Routers I’ve Used

Netgear R8000 AC3200 Nighthawk AC3200 Tri-Band Wi-Fi Router – https://amzn.to/2W6zSWv

Netgear R8300 AC5000 Nighthawk X8 Smart Wi-Fi Router – https://amzn.to/2AXDDEC

 

RELATED POSTS:

Stabilizing The Netgear R7000 Router Running FW 1.0.9.60_10.2.60

Here We Go Again! Netgear FW v.1.0.9.60_10.2.60 Fixes Some Bugs; Creates New Issue on R7000

Netgear Releases FW 1.0.9.60_10.2.60 for R7000 Router; Fixes Bugs with FW v.1.0.9.58_10.2.58

Connectivity Issues After Upgrading Netgear R7000 To Firmware v.1.0.9.58_10.2.58

Netgear Releases FW 1.0.9.64_10.2.64 for R7000; Early Reviews Not Promising

Netgear recently released firmware version 1.0.9.64_10.2.64 for the Netgear R7000 AC1900 Nighthawk Smart Wi-Fi router. For those continuing to experience issues with the Netgear R7000 running firmware version 1.0.9.60_10.2.60, don’t rely on this latest update to resolve your issues. Based on some early reviews and comments from Netgear Community posts, this latest firmware release does not appear to fix or resolve the ongoing issues brought about by firmware versions 1.0.9.60 or 1.0.9.58.

According to Netgear’s firmware release notes, firmware version 1.0.9.64_10.2.64 includes the following:

New features and enhancements:

  • Improves the network device identification.

Bug Fixes:

  • Fixes the issue where the router should not remember the device name that was changed before the reset.

  • Fixes the issue where the OpenVPN client Connection Type shows as wired in the Attached Devices page but no information about the client shows in the VPN Client Devices tables.

  • Fixes the issue where the user can access the Internet Setup page via the Router/AP/Bridge/Repeating mode page.

  • Fixes the issue where some functions are grayed out if the user is using Firefox as the web browser.

  • Fixes the issue where watch devices cannot be detected and don’t display on the attached devices page.

  • Fixes the issue where some devices will display an unknown device name.

  • Fixes the issue where offline devices do not disappear.

  • Fixes the issue where the device name will show an unknown string.

Known Issues:

  • When using the Nighthawk app, the login fails when the password contains special characters.

  • The Internet will not disconnect when using a static WAN IP address and has reached the monthly traffic meter limit.

  • When disabling Circle using the Nighthawk app, the GUI still shows the Circle status as enabled.

The release notes make no mention of any fix for the dropped wireless connections or sporadic router reboots. If your Netgear R7000 router is running stable on firmware version 1.0.9.42, your safest bet is to stick with it. If you are feeling bold and want to do your own testing, you can download the latest firmware release through the R7000’s dashboard or directly from the Netgear support website.

Personally, until Netgear releases a solid piece of firmware to resolve the ongoing issues with the R7000, there’s no reason to continue putting time and effort into trial and error fixes. It’s time to move on.

If you’re interested, below are some stable routers I’ve used along with some new routers I’m looking into.

LINKS:

Note: The links below include Affiliate Links. Please review the section entitled "Affiliate Links" in the Terms of Use of this website for additional information.

Stable Netgear Routers I’ve Used

Netgear R8000 AC3200 Nighthawk AC3200 Tri-Band WiFi Router – https://amzn.to/2W6zSWv

Netgear R8300 AC5000 Nighthawk X8 Smart WiFi Router – https://amzn.to/2AXDDEC

Alternative Routers I’m Considering

Synology RT2600 AC – https://amzn.to/2W0ZDHP  

Netgear XR700 AD7200 Nighthawk Pro Gaming WiFi Router – https://amzn.to/2MnzePK

Netgear RAX80 AX6000 Nighthawk AX8 8-Stream WiFi Router – https://amzn.to/2RTqlms

AmpliFi Mesh Wi-Fi System - https://amzn.to/2SaYpup

RELATED POSTS:

Stabilizing The Netgear R7000 Router Running FW 1.0.9.60_10.2.60

Here We Go Again! Netgear FW v.1.0.9.60_10.2.60 Fixes Some Bugs; Creates New Issue on R7000

Netgear Releases FW 1.0.9.60_10.2.60 for R7000 Router; Fixes Bugs with FW v.1.0.9.58_10.2.58

Connectivity Issues After Upgrading Netgear R7000 To Firmware v.1.0.9.58_10.2.58

Connectivity Issues After Upgrading Netgear R7000 To Firmware v.1.0.9.58_10.2.58

If you’ve recently upgraded your Netgear R7000 router to firmware version 1.0.9.58_10.2.58 and have been experiencing intermittent or sporadic connectivity issues with your router’s 5G wireless network connection, wired network connection or the like, it may be due to the firmware. Issues that I’ve experienced include devices losing or dropping the connection to the 5G wireless network, unable to detect the 5G wireless network SSID, latency or loss of connectivity over the 5G wireless network, sporadic or intermittent connectivity issues over the wired network and spontaneous reboot of the Netgear R7000 router.

Netgear has quietly pulled firmware version 1.0.9.58_10.2.58 along with its release notes and related documentation from their support website. The Netgear support website currently lists firmware version 1.0.9.42 as the current version. You don’t necessarily need to revert to firmware version 1.0.9.42 if you are currently on firmware version 1.0.9.58_10.2.58.

Just as quietly as Netgear removed firmware version 1.0.9.58_10.2.58, Netgear has also quietly released firmware version 1.0.9.60_10.2.60, which is available for download via the Netgear R7000 router’s admin console. You’ll need to first login to your Netgear R7000 router. Upon successful login, you should see a message at the top of the admin console homepage indicating that a new firmware version for the Netgear R7000 is available. Clicking on the message should take you to the “Router Update” page where you can download and install firmware version 1.0.9.60_10.2.60. Alternatively, from the admin console homepage, you can go to the “Advanced” tab then under “Administration,” go to “Router Update” and click “Check” to check for and install the new firmware. The router will require a reboot to complete the firmware upgrade.

Netgear has not provided any release notes or related documentation regarding firmware version 1.0.9.60_10.2.60 as of the date of this post so be sure to check the Netgear support website for further updates.

Hopefully, firmware version 1.0.9.60_10.2.60 does the trick!